XYZ軟體急先鋒 http://83.to/twvcd SolidWorks 2020 SP4.0 Full Premium x64 非常專業的三維圖形設計軟體多國語言含中文破解版(DVD9兩片裝此片售價400元)

XYZ軟體急先鋒
SolidWorks 2020 SP4.0 Full Premium x64 非常專業的三維圖形設計軟體 多國語言含中文破解版(DVD9兩片裝 此片售價400元)




-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
軟體名稱:SolidWorks 2020 SP4.0 Full Premium x64 非常專業的三維圖形設計軟體 多國語言含中文破解版(DVD9兩片裝 此片售價400元)
語系版本:多國語言版(含繁體中文)破解版
光碟片數:2片裝
破解說明:
系統支援:For Windows 7/8/10
軟體類型:非常專業的三維圖形設計軟體
硬體需求:PC
更新日期:2020-08-28
官方網站:
中文網站:
軟體簡介:
銷售價格:$400元
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
　




破解說明:
請先把2片的內容複製到同一個資料夾再進行安裝

首先不要聯網，可以直接斷網
需要確保安.NET Framework 3.5和4.0，沒有就安裝一下
最後還要確保把之前安裝的舊版本完全卸載，以管理員身份運行SolidWorks_Flexnet_Server \ server_remove.bat
    然後等到服務“ SolidWorks Flexnet伺服器”將被刪除
    之後，從電腦中刪除SolidWorks_Flexnet_Server檔夾
運行_SolidSQUAD_內的註冊表檔 “ sw2020_network_serials_licensing.reg”並確認添加資訊
將_SolidSQUAD_內的檔夾“ SolidWorks_Flexnet_Server”複製到C：（C:\Program Files）
以管理員身份運行“ SolidWorks_Flexnet_Server \ server_install.bat”，然後等待直到新服務，將安裝並啟動“ SolidWorks Flexnet伺服器”
進入SolidWorks.2020.SP0.Full.Premium.DVD，雙擊setup開始安裝
點下一步繼續
序列號已經自動輸入
選擇中文語言
選擇安裝目錄
在許可證服務配置介面，埠@伺服器填寫25734@localhost

如果中文語言包安裝失敗，我們運行語言包“chinese-simplified”裏面的setup.exe完成中文安裝
（語言包安裝完成的，無視這個步驟）
安裝完成
重啟電腦安裝啟動完成，運行就是中文破解版了

0. If you already have SW2020 cracked by SSQ installed you can just update 
    existing SW2020 to this one. No additional crack is needed So you can skip 
    steps 1-5

00. Before installation, block the outgoing Internet access by means of Windows 
   Firewall or cord plug. Check .NET Framework 3.5 and 4.0 are installed. If
   .NET Framework 3.5 (including 2.0) is not installed, go to 
   "Control Panel" -> "Programs and Features" -> "Turn Windows features on or off" ->
   -> select ".NET Framework 3.5 (including 2.0)"

000. Uninstall (if exist) SolidWorks_Flexnet_Server from SW2019 SSQ's release!
    To do it run as Administrator SolidWorks_Flexnet_Server\server_remove.bat 
    and wait until service "SolidWorks Flexnet Server" will be removed
    After that delete SolidWorks_Flexnet_Server folder from computer 

1. Run "sw2020_network_serials_licensing.reg" and confirm to add info 
   into Windows Registry

2. Copy folder "SolidWorks_Flexnet_Server" to C: , run as Administrator
   "SolidWorks_Flexnet_Server\server_install.bat" and wait until new service 
   "SolidWorks Flexnet Server" will be install and started

   ATTENTION!
   The computer's name can only contain English letters, numbers, dashes (-) and 
   lower accents (_).
   If your computer's name contains inappropriate symbols, you have to rename it!

3. Install SolidWorks 2020 (including PDM Client if required). 
   DO NOT install SolidNetwork License Server (SNL)!
   When asked of License Server definition input: 25734@localhost

   3.1 If the System Check Warning window appears, ignore it (click Next to continue)

   3.2 If the warning "SolidWorks Serial number was not found in activation database" 
       appears, ignore it (click OK to continue)

   3.3 If the full list of SW products to install is not visible,
       click "Select different package" and tick option 
       "Select products not included in this package"

   3.4 Select SW products to be installed

   3.5 If the "The Installation Manager was unable to determine the current subscription 
       expiration date. Would you like to reactivate your license to update this information?"
       appears, press No and press Yes in "Do you want to do it later?" prompt.

4. After end of setup overwrite original SolidWorks 2020 program folders (if exist)
   with cracked ones from folder "Program Files\SOLIDWORKS Corp" and "Program Files (x86)"

   Folders to be replaced from "Program Files\SOLIDWORKS Corp" (at setup by default):

   C:\Program Files\SOLIDWORKS Corp\eDrawings  
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS CAM
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Composer
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Electrical
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Explorer
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Flow Simulation
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Inspection
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Manage Client
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PCB
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PDM
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Plastics
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize Boost

   Folders to be replaced from "Program Files (x86)" (at setup by default):

   C:\Program Files (x86)\SOLIDWORKS PDM


5. Run "SolidSQUADLoaderEnabler.reg" and confirm to add info 
   into Windows Registry

6. REBOOT COMPUTER!

7. Run SolidWorks > Help > SolidNetWork License Manager > License Order

   Use the "Move Up" and "Move Down" buttons to position Premium products with 
   the same name higher than Professional and Standard products

   Click "Apply" to save the settings

   Click "OK" to close the SolidNetWork License Manager

8. Enjoy


NOTE:

   Since SW2019 network licensing crack uses other serial numbers than the previous (SW2010-2018)
   versions then if you installed SW2020 on one same computer with SW2010-2018 you need to:
 
   For SW2017-2018 reactivate them by running the corresponding SSQ's SW2017-2018 Activator (run 
   SSQ's SW2017-2018 Activator, select proper SW verssion and click "Activate Licenses")

   For SW2010-2016 replace original SolidWorks 2010-2016 program folders (if exist)
   with cracked ones from folder "Program Files\SOLIDWORKS Corp" and "Program Files (x86)"

   Folders to be replaced from "Program Files\SOLIDWORKS Corp" (at setup by default):

   C:\Program Files\SOLIDWORKS Corp\eDrawings  
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS CAM
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Composer
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Electrical
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Explorer
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Flow Simulation
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Inspection
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Manage Client
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PCB
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PDM
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Plastics
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize
   C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize Boost

   Folders to be replaced from "Program Files (x86)" (at setup by default):

   C:\Program Files (x86)\SOLIDWORKS PDM

軟體簡介:
　
SOLIDWORKS 2020 的十大新增功能：從設計到製造
零件與特徵
SOLIDWORKS 2020增強了網格建模模式功能：
可以基於圖形網格幾何體或網格BREP幾何體創建模型並添加幾何特徵，通過圖形區域的
選擇分面、分面翅片和分面頂點，選擇識別一般的特徵模型；同時可對BREP模型增加圓
角、拔模、剪裁等操作，達到修改模型的操作；此外還可以通過模型比較操作，對比逆
向工程掃描的模型與源CAD模型進行比較，顯示兩者幾何體不匹配的位置。
草圖繪製
SOLIDWORKS 2020在樣條曲線和2D草圖的任何其他草圖實體中應用扭轉連續性關係，對草
圖實體應用等曲率和等效曲，使曲線之間在端點處更加光順連續。
結構系統
SOLIDWORKS 2020在結構系統上增強了構建和邊角剪裁功能：
擺脫以往通過3D草圖才能創建結構系統的創建方式並加強了創建模型的方式；可以通過
點到點、點到面、面到面等方式進行構件的創建，並且可以通過鏡像、陣列等操作快速
創建相同的結構佈局。
大裝配審閱模式
在大型設計審閱模式下編輯裝配體，可以在有限的電腦資源下對大型裝配進行操作，除
了舊版的功能之外，SOLIDWORKS 2020可以操作更多的編輯功能，如參考幾何圖形的配合
、創建陣列等操作。
柔性零部件

SOLIDWORKS 2020可以將零件定義為柔性，以便通過裝配體幾何體來驅動柔性零部件的幾
何體。
柔性零部件的自定義和配置特定屬性與零部件標稱狀態下的這些屬性相同，屬性顯示標
稱狀態下的值，選擇使用剛性狀態下的品質屬性以將處於剛性狀態的零部件品質屬性應
用到啟動的柔性零部件，柔性零部件會在外部參考更改時動態更新。
程圖鏈尺寸
在工程圖中，通過滑鼠操作可以快速將基準尺寸轉換為鏈尺寸。


-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=